Avidsen IPC380-i Mode D'emploi page 31

After entering the password for the WiFi network that
the camera should be using, click on "Ensemble"
(Set) or "Appliquer" (Apply): your tablet or
smartphone is asking if the camera is accessible
and if it is ready to be confi gured
Android
If your camera is nearby and not confi gured, click
on "Oui" (Yes) or "OK" to begin confi guration using
the app.
Note: the camera will take 30 seconds to load up
after being switched on.
Android
Once the WiFi connection information has been sent
to the camera by the app, the camera will connect
to the network using WiFi.
Your smartphone or tablet will ask you to change
the password:
720P WiFi iP vcamera
iOS
iOS
d - CONFiGurATiON
Android
Click on "Oui" (Yes) and enter a new password
Android
Finally, click on "Terminé" (Done) on the upper right-
hand side of the screen or on "Appliquer" (Apply)
to add the camera to the list of cameras recognized
by the app.
iOS
iOS
iOS
11
EN EN