Magellan MiVue 240 Mode D'emploi page 11

Setting the date and time.
To make sure of the correct date and time stamp for your recordings, check
the date and time settings before you begin recording.
1. When not recording, press
2. Select Date/Time > press
3. Select Set > press
4. Press the Power key repeatedly to change the setting fields.
Date format
ƒ
Date fields
ƒ
Time fields
ƒ
Use and
Recording in driving mode.
Continuous recording
When you connect the car charger to your vehicle's Vehicle Power Adapter (VPA),
the dashcam starts Continuous recording automatically. The recording is divided
into individual 130MB video clips, and recording doesn't stop between clips.
Your dashcam automatically stops and saves the recording when the vehicle
engine is turned off. Then, your dashcam turns off automatically. To stop recording
manually, press
When recording is not in progress, manually start Continuous recording at any
time by pressing
twice to open the Setup menu.
.
.
to select a setting > press
.
. To stop recording, press
.
.