Mc Haus artic-20 Mode D'emploi page 39

ASSEMBLY
PLACE OF INSTALLATION
Mount in a flat, dry place, leaving 50cm free around the appliance to
allow regular air circulation, as shown in Fig. 1.
EXHAUST PIPE ASSEMBLY
Screw the exhaust duct assembly into the air outlet behind the panel.
MOUNTING ON THE WINDOW SEAL PLATE
Insert the air exhaust duct into the window sealing plate, adjust the
opening width of the window so that the window can match the sealing
plate correctly; the length of the sealing plate is adjustable.
INCORRECT INSTALLATION
It is important to keep the exhaust duct smooth. Incorrect installation will affect
the work of the A/C.
Avoid seriously bending the exhaust pipe.
Make sure that the air can flow smoothly into the duct.
WARNING: The exhaust pipe is specially designed for this model. Do not replace or lengthen it;
otherwise, it will result in a failure.
Mc HAUS
3
artic-20
EN
1
2