Know Your Switchplate - U.S. Products HYDRAPORT 1200 Information Et Directives D'utilisation

ENGLISH

KNOW YOUR SWITCHPLATE

A Circuit Indicator (green) - When this light is on, it indicates that the two cords are plugged into separate circuits. NOTE: if this indicator
light is not turned on, you may have both power cords on the same circuit and this can trip the circuit breaker in the wall.
B Vacuum Switch - This switch turns the vacuum motor ON and OFF.
C Auto-Dump Switch – This switch enables/disables the auto-dump pump. With the pump enabled, the pump will automatically turn ON
and OFF based on the position of the fl oat in the recovery tank.
D Solution Pump Switch - This switch turns the solution pump ON and OFF. The output pressure is adjusted at the pressure adjustment
knob.
CAUTION!
The circuit breaker in the wall panel can trip if both cords are on the same circuit.
A
A - 8
INSTRUCTIONS FOR USE
B C
HydraPort 1200 - 56091030
REVISED DATE
D
11/2011