Legamaster e-Board Touch 2 Mode D'emploi page 4

QUICK SETUP GUIDE
Please retain this Quick setup guide for
future reference.
Please contact Legamaster directly if you
have questions on the use of e-Board Touch 2
after reading the user manual.
Important: Please read the PRECAUTIONS,
SAFETY INSTRUCTIONS and this USER
MANUAL carefully before installing
e-Board Touch 2.
1  Precautions and safety instructions
Before using e-Board Touch 2, please read this user manual tho-
roughly to help protect against damage to your own and other
people's property and ensure your own and other people's perso-
nal safety.
 Be sure to observe the following instructions.
 For your safety, be sure to observe the warnings contained
in this guide.
 For installation or adjustment, please follow this quick setup
guide and refer all servicing to qualified service personnel.
 Do not install additional accessories (e.g. loudspeakers) other
than original Legamaster accessories.
Safety Precautions
If smoke or a peculiar smell comes from e-Board Touch 2,
remove the USB plug from the socket immediately.
Failure to do so may result in fire or electric shock.
Contact your dealer for inspection.
If water is spilled on e-Board Touch 2,
remove the USB plug from the socket immediately.
Failure to do so may result in fire or electric shock.
Contact your dealer for inspection.
If e-Board Touch 2 is dropped or the housing is damaged,
remove the USB plug from the socket immediately.
Failure to do so may result in fire or electric shock.
Contact your dealer for inspection.
Moving and Carrying Notice
 Moving Notice:
Moving e-Board Touch 2 requires at least two people.
If not, it may drop and a serious injury may result.
 Carrying Notice:
This e-Board Touch 2 is heavy; please follow the instructions
below when you are ready to carry e-Board Touch 2.
Failure to do so may cause injury.
4
Installation
When installing e-Board Touch 2, please follow the instructions in
this user manual
Don't install in a high-temperature environment.
If e-Board Touch 2 is used in a high-temperature environment or
in direct sunlight, it may cause the case or other parts to become
distorted or damaged resulting in overheating or electric shock.
Don't install in a high-humidity environment.
This may cause overheating or electric shock.
Don't install near any heat sources such as radiators, hot-air
outlets, stoves, or other apparatus that produce heat.
This may cause a fire or electric shock.
Don't move e-Board Touch 2 when it is connected to a computer.
 When moving e-Board Touch 2, make sure you remove the
plug and cables from the socket or source.
 T ransport e-Board Touch 2 upright. Avoid placing e-Board
Touch 2 face up or face down.
 Handle e-Board Touch 2 gently. Do not drop.
2  Package contents
 Packing list
Item
1 e-Board Touch 2
2 Ergonomic stylus
3 USB cable
4 Pen tray
5 Wall fixed mounting kit
6 USB drive with user manual and calibration software 1
3  Mounting information
1. Mounting can only be executed by qualified staff
2. Warning! Inaccurate mounting can cause injury or damage
of the product
3. Wall Mounting is only possible on walls of stone or walls with
equal strength. Mounting is not possible on system or gypsum
walls!
4. As wall materials vary, fixing materials for walls are not
included. For advice on suitable fixing materials, please contact
your local specialized merchant.
5. Include the inspection of mounting and moveable parts as part
of your maintenance procedure
Note only for chalk/green board surfaces: Before use, please co-
lour the whole enamel chalk surface with white chalk. Afterwards
clean with damp cloth and your chalkboard is ready for use.
Q'ty
1
1
1
1
1