Baby Trend Kid Cafe Snap Fit 3-in-1 Manuel D'instruction page 5

ASSEMBLY
TO ATTACH TRAY
WARNING:
check that the high chair is
locked in the open position
before using.
WARNING:
is not designed to hold the
child in the chair. The child
must be secured in the high
chair at all times by the
5-point restraining system,
either in the reclining, semi-
reclining or upright position.
Do not force the tray against
the child.
6) • To attach the Tray, line up the Grooves
on the bottom of the Tray with the
armrests of the high chair. Squeeze the
front release handle and slide the Tray
onto the armrests (Fig. 6a). The Tray
has a 3-position adjustment. To adjust
the position, squeeze the front release
handle located underneath the Tray and
reposition the Tray to the desired position.
Release the Tray's handle. Make sure the
Tray is securely locked in its new position
before use.
ATTENTION:
Never leave the tray in a position where the
warning signs are visible (Fig. 6b).
TO ATTACH INSERT TRAY
7
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Always
Groove
The tray
Fig. 6a
Fig. 6b
7) • The dishwasher safe Tray Insert snaps
onto the High Chair Tray and is held in
place by tabs on the sides of the Tray.
When installing the Tray Insert make
sure that it snaps into place to prevent
the child from removing the Tray Insert.
To remove Insert unsnap tabs from the
Tray (Fig. 7a).
• The Tray may be stored on the back
legs of the High Chair. Align the holes in
Release Handle
the rear of the tray with the small pegs
on the back legs (Fig. 7b).
Copyright © 2019, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 7a
Fig. 7b
8