Assembly - Baby Trend Snap-N-Go GX Universal Manuel D'instruction

ASSEMBLY

• Remove Front Wheels: Push release
button on the side of the wheel hub and
pull wheel assembly from hub (Fig. 1d).
REAR WHEELS
2) • Lean the stroller forward and press the
rear wheel post into the rear frame hub
until it clicks into place (Fig. 2a).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
• Remove Rear Wheels: Push tab outward
and pull wheel from hub (Fig. 2b).
5
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
BASKET
3) • The basket needs to be installed prior to
use. Insert the ends of the Basket Tube
into the basket frame until it locks into
Release Buttons
place (Fig. 3a).
Fig. 1d
• Snap the buttons of the basket flap over
the Basket Tube (Fig. 3b).
MULTI-POSITION HANDLE
4) • To adjust the handle, press the release
buttons to move it up or down into a
Fig. 2a
comfortable position for the user (Fig. 4)
NOTE: Make sure the handle clicks into
place before using.
PARENT TRAY
WARNING:
burns, never put hot liquids
in cup holder. Avoid possible
tipping, do not place more
than 1 lb. (0.45kg) in cup
Fig. 2b
holder.
5) • Attach the parent tray to the frame by
wrapping the ends of the parent tray over
the handles of the frame and snapping
the strap buttons closed (Fig. 5).
To avoid
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 3a
Fig. 3b
Release Button
Fig. 4
6
Fig. 5