Renkforce 1052378 Mode D'emploi page 3

G Operating Instructions
Digital multi-function wristwatch
Item no. 1052378
Intended use
The wristwatch is used to display the time and the calendar data as well as the time
of a second time zone. Furthermore, an alarm function and a stopwatch are also in-
tegrated.
The watch may only be powered by a battery (for the type, refer to "Technical data").
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
No part of the product may be modified or converted.
The safety instructions must be observed at all times.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Contents
• Wristwatch
• Operating instructions
Explanation of the symbols
This symbol indicates specific risks associated with handling, function and
use.
The "arrow" symbol indicates special tips and operating information.
Safety Instructions
F irst, read the complete operating manual carefully, as it contains impor-
tant information about the proper operation.
T he warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any re-
sulting damage!
W e shall not accept liability for damage to property or personal injury
caused by incorrect handling or non-compliance with the safety instruc-
tions! The warranty will be void in such cases!
• For safety reasons, any unauthorised conversion and/or modification to
the product is not permitted.
• Do not expose the product to high temperatures, strong vibrations or
heavy mechanical loads.
• If you have any doubts about the correct operation, or the safety of the
product, please consult a specialist.
• This product is not a toy and must be kept out of the reach of children.
• Do not leave packaging materials unattended. It may become a dangerous
plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or
accidental drops, even from a low height.
• Also observe any further safety instructions in the individual sections of
this operating guide.
Features
• Stop-watch
• Display of a second time zone
• Calendar function
• Alarm function and hour signal
• Clock face light
Controls and Parts
(1) RESET button
(2) MODE button
(3) ST/STP button
(4) LIGHT button
Selecting the operating mode
• With the MODE (2) button, you can select the operating mode of the wristwatch.
• Press the MODE (2) button repeatedly until the operating mode is displayed:
Time with date
Stopwatch (SP)
Operating Modes
If you press and hold the ST/STP button (3) during the settings, the value to
be set will be changed continuously.
a) Time display
• Press the MODE button (2) the time is displayed.
Display format
• Press the RESET button (1) to define the display format of the time (12h or 24h for-
mat).
• As long as you press the ST / STP button (3), the date (month, date and year) appears.
Setting the time of day
• Press the RESET button (1) until the second display flashes.
• Press the ST/STP button (3) to reset the second display to "00".
• Press the MODE button (2) to switch to the next setting step (hours).
• Use the ST/STP button (3) to set the hour display.
• Set the other values (minutes, year, month and date) as described above. In this
process, the MODE button (2) selects the value to be set and the ST/STP button (3)
changes the value to be set.
• After completion of the time setting press the RESET button (1) to save the settings.
b) Alarm function
• Press the MODE button (2) until the alarm time is
Activation or deactivation of alarm function / hourly time signal.
• To activate or deactivate the hour signal or the alarm, press the ST/STP button (3).
When the hour signal is activated, a bell icon appears on the left top of the display.
When the alarm is activated, an alarm icon appears on the right top of the display. If
both functions are activated both symbols appear.
• At the set alarm time, an alarm sound is emitted for approx. 60 seconds. Press any
button to turn the alarm sound off.
1
2
Alarm function (AL)
Time of second time zone (T2)
displayed.
3
4