IRIS BLW-C2 Mode D'emploi page 5

HOW TO USE
3 Insert the power plug securely into the electric socket.
In standby mode, press any key to light up the power indicator,
and it will then enter mode selection.
4 Select automatic warming mode.
Press the MODE button to select desired mode.
PRESET FUNCTIONS
Winter (High temperature air 60 minutes)
WINTER SUMMER
Summer (High temperature air 60 minutes + air blast 20 minutes)
WARM UP
Dust Mite Eliminator
Warm Up (High temperature air 20 minutes)
MODE
Dust Mite (High temperature air 100 minutes)
Eliminator
5 Press "START/ON" button.
This product will display the remaining time after it starts running. It will stop heating
after set time has run out, and then it will cool down the main body and hose with a
20 second air blast before it stops running.
• During and immediately following use, do not use the blanket or allow pets on
the blanket. Doing so may cause burns.
• Do not unplug the power plug while product is running.
• Press the "CLEAR/OFF" button if you want to stop warming. Product will
stop warming and will blast air for 20 seconds, and then the product will stop
running.
• The power indicator will turn off 5 minutes after use.
• If the warmer does not warm the whole length of the blanket or does not reach
the corners, please insert the hose on the other side of the blanket and run the
product again.
*It is more efficient to use a mattress cleaner after dust mite elimination.
6 Put the product away after use.
• Firmly grip the power plug to unplug it from the electric socket.
• Close the air flap and fold the hose.
Fold
• Bundle up the power cord.
TIME
SETTINGS
PRESET FUNCTIONS
TEMPERATURE WINTER SUMMER
WARM UP Dust Mite Eliminator
TIMER
MODE
START/ON
Bend
Press
gently
to store
hose
TIME MINS
POWER SUPPLY
SETTINGS
PRESET FUNCTIONS
MINS POWER SUPPLY
TEMPERATURE WINTER SUMMER CLEAR/OFF
WARM UP Dust Mite Eliminator
CLEAR/OFF
TIMER START/ON
MODE
START/ON
(Front) (Back)
7
Drying Shoes (manual mode)
Please close the air flap before use.
1 Add the shoe drying attachment to the end of the hose.
2 Insert the shoe drying attachment into the shoes.
Tips for faster drying
• Remove excess water with a dry cloth.
• Loosen shoelaces and place them in the shoes.
3 Insert the power plug securely all the way into the electric socket.
In standby mode, press any key to light up the power indicator
and enable mode selection.
4 Manual mode selection.
Select the running temperature and time according to the type of shoes.
Cloth Shoes
Press "TEMPERATURE" button to select
"High Temperature" (Red).
TEMPERATURE
Press "TIMER" button to set remaining time to
60 minutes.
TIMER
Power cord
•
Cover
PRECAUTIONS
•
Leather Shoes, Boots
Press "TEMPERATURE" button to select
"Air Blast" (Blue).
TEMPERATURE
Red
Press "TIMER" button to set remaining time to
120 minutes.
TIMER
TIME MINS
The drying time differs due to wet conditions, shoe materials and types, room
temperature, and moisture levels. Please dry again if shoes are not sufficiently dried.
Leather, artificial leather and vinyl shoes may deform and change color from warm
temperatures. Please make sure to only select "Air Blast" (Blue) mode.
8
Blue
TIME MINS