Scotts PR17215S Manuel De L'utilisateur page 5

PACKING LIST
- Pruner
- Blade Guard
- Battery Charger
- Battery
- Owner's Manual
UNPACKING
Carefully remove the product from the box. Make sure
that all items listed in the packing list are included.
Inspect all items carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
WARNING: If any parts are damaged or missing
please do not operate this product until the parts are
replaced. Failure to heed this warning could result in
serious personal injury. Call our customer service help
line at 1-800-618-7474 for assistance.
BEFORE STARTING THE EQUIPMENT
INSTALLING THE BATTERY
Press the both side of the battery pack as shown in
Fig.1 and push the battery pack into the mount
provided. When the battery pack is positioned as in
Fig. 2, make sure that the battery pack is locked in
place! To remove the battery pack, proceed in reverse
order.
CHARGING PROCEDURE
(Fig.3)
1. Take the battery pack
out of the equipment. Do
this by pressing the both
side of the battery pack.
2. Make sure the wall outlet
in your home is normal
household voltage
(AC120V, 60 Hz). Insert
the battery charger plug
into the wall outlet.
3. Insert the charger cable into the charging inlet on
the battery.
GENERAL INSTRUCTIONS
Fig.1
Fig.2
Fig.3
5
Model PR17215S
4. The red LED charging indicator lights up to tell
you that the battery pack is on charge. The
battery is fully charged when the red LED is no
longer lit, and green LED lights up.
 During the charging process, it is normal for the
battery pack to warm up.
 Only charge the battery between 0°-37.8°C (32°
-100°F).
 After prolonged use, allow the battery to cool
down before recharging.
 To ensure that the battery pack provides long
service, you should take care to recharge it
promptly. You must recharge the battery pack
when you notice that the power of the cordless
pruner drops. Never fully discharge the battery
pack. This will cause battery damage.
STARTING AND STOPPING
Starting:
1. Push the safety lock button and press the
on/off trigger switch at the same time.
2. Release the safety lock button.
Stopping:
1. Release the on/off trigger switch.
OPERATING INSTRUCTIONS
WARNING: Before any work on the machine (e.
g. maintenance, changing the tool, etc.) as well
as during its transport and storage, ensure
Safety lock-off is in the off position. There is
danger of injury when the On/Off switch is
unintentionally actuated.
To close the moving blade, activate the safety
lock-off by pushing it forward and pressing the ON/
OFF switch at the same time. To open the blade,
let go of the ON/OFF switch.
Never operate the machine in an awkward
posture. This may cause serious injury.
Keep your free hand away from the cutting
area. Never touch the blades. They are very
sharp and you may cut yourself. Always wear
protective gloves while pruning.