6. Preparation
Carefully inspect the product before use.
Before initial use, charge the product for about 3-4
hours to fully charge.
Always recharge before the initial use.
When charging, this product cannot be started and
used.
The signal light turns red while charging and green
once fully charged.
When the battery is low, the signal light flashes red.
Charge as soon as possible when this happens.
The default working time for each gear is 15
minutes. After 15 minutes of operation, the product
will automatically stop massaging. If it needs to be
continued, click the "
the product will automatically shut down after 3
minutes of standby.
Type-C
" key. If nothing happens,
9
USB