DrBrowns S1006 Notice D'utilisation page 9

DISASSEMBLY
Follow these steps to disassemble the Collection Units for cleaning:
l
First loosen and remove the Collection
Bo le from the Connector.
l
To remove the Breastcup, gently pull
on the perimeter tabs to separate it
from the Connector.
l
With the Cap in hand, pull the Sealing
Insert downward to dislodge.
BEGIN FULL-LENGTH INSTRUCTIONS
l
Then remove the Bo le Seal from the
underside of the Connector.
l
To remove the Cap, simply pull up on
the Cap tab at the back. This will separate
from the Connector.