Manuels Connexes pour caramia furniture CHELSEA CONVERTIBLE CRIB
Sommaire des Matières pour caramia furniture CHELSEA CONVERTIBLE CRIB
- Page 1 CHELSEA CONVERTIBLE CRIB Assembly Instructions Instructions d' assemblage IMPORTANT : Prière de lire attentivement le mode d'emploi et de le conserver pour référence ultérieure. IMPORTANT: Please read instructions carefully and keep for future reference.
- Page 2 Thank you for choosing Caramia Furniture. To ensure the best performance from your crib, please read the following instructions carefully. Carefully remove and layout all parts. Familiarize yourself with all exhibits and diagrams to facilitate the assembly of your crib.
- Page 3 Assembly of Crib Ends/ Assemblage des extremites de lit d'enfant Step 1: Attach mattress base to crib ends, Attach the mattress base to the crib ends by inserting Allenhead Bolts (F), Lock washer (I), Washer (J) to lower holes. Using Allenhead wrench (P) that are provided, tighten the bolts on both side.
- Page 4 Step 2: Attaching Headboard & Footboard. & Attach the headboard (A) Footboard (B) to the left (C) and right crib (D) ends by Bolts (G), Lock washer (I), Washer (J) into all 16 hole locations. 8 holes on each Crib Side parts (C) & (D). Using Allenhead wrench (P) that is provided, tighten the bolts on both side.
- Page 5 Step 3: In order to adjust the height of the mattress support,remove the 4 Allenhead Bolts (F) from the crib ends to the mattress support. Revise the height to the desired position, then reinstall the 4 Bolts. Tighten securely. Pour ajuster la hauteur de I'appui de matelas, enlevez les 4 boulons six pans de (F) des extrernites de lit d'enfant I'appui de...
- Page 6 Convert to Toddler Day Bed/ Transformer en lit de jour pour bébé Step 4: Remove the Footboard to convert into a Toddler Day Bed. étape 4: Enlever Ie pied de lit pour leTransformer en lit de jour pour bébé. Using 8 Allenhead Bolts (U) and 8 Insert Bolts (V) to hide all the holes on Left and Right Crib End (C), (D).
- Page 7 Convert to Full Size Bed/ Transformer en plein lit Step 5: Assembly of the Full Size bed (Extension kit is not included). Attach rails to the headboard & footboard parts by inserting hooks. The wood slats have to be fixed on each hole of the rails with 35 mm wood screws.