Leifheit Digitales Ofen & BBQ Mode D'emploi page 31

The measuring range is maximum 99 min-
utes and 59 seconds.
If necessary, press button
the same time to reset the indicator in the
display to 00:00.
1. Set the function selector switch [7] to
"TIMER".
2. Press the
measurement.
Pressing again interrupts the time measure-
ment and resumes it again.
F10 Timer function
1. Press the
to set the duration of the short-time meas-
urement. If you keep both buttons pressed,
the course of the values displayed runs
quicker.
2. Press the
start the timer again.
After the set time has elapsed, signal tones
sound for approx. 30 seconds.
Any button must be pressed to interrupt the
signal tones.
button thus starting the time
(Min.) and
button to start, interrupt or
31
and at
(Sec.) button
GB