Setup; Cleaning And Care - FANATEC SPEEDSTER 3 ForceShock Mode D'emploi

3.3 Setup

The 4 most important configurations for up to 4 games can be
saved permanently in the steering wheel independently from the
games console.
Press on the key "SETUP" and you will see the currently active
setup in the LED Display (S1 to S4).
If you now change something in the TUNING mode, this effects the
active setup.
To change the active setup, press on the arrow keys "up" and
"down".
After leaving the SETUP mode, the settings are permanently
stored.

4.0 Cleaning And Care

Cleaning
Unplug the SPEEDSTER 3 ForceShock™ from the console
®
before cleaning it. Clean the steering wheel and pedals with a soft
cloth slightly moistened with a mild detergent solution.
Do not use liquid cleaners or aerosol cleaners such as benzene
or paint thinner. When using a synthetic duster, refer to the
precautions supplied with it.
Placement
The product should be situated away from heat sources such as
radiators, or other products that produce heat. Operate in an
environment where temperatures range from 5°C - 35°C.
Do not use the product on an unstable surface. The product may
fall, causing serious injury to a child or adult and serious damage
to the product.
Do not use the product near water.
Do not leave the steering wheel on the floor.
Object entry
Never push objects of any kind into the product through openings
as they may touch dangerous voltage points that could result in
a fire or electric shock.
Handling
Do not throw, let the steering wheel or pedals drop, or allow any
solid objects to fall onto the peripheral or its accessories. When
transporting the steering wheel, do not subject it to any strong
impact. Doing so may cause malfunction.
Do not twist or pull the cable too strongly.
N O T E :
Never disassemble or modify the SPEEDSTER
!
ForceShock™.
ENDOR ® AG expressly prohibits the analysis and use
of its circuit configurations, hardware, software,
and firmware.
16
3
®