Unhitching From A Tow Vehicle; Notes - Lippert Components Quick Drop Tongue Jack 733926 Manuel D'installation Et D'utilisation

Unhitching From A Tow Vehicle

1. Chock the tires of the trailer.
2. Make sure the foot pad of the Quick Drop Tongue Jack
is pinned securely in place with the clevis pin and hairpin
cotter pin (Fig. 6A).
3. Make sure the ground surface under the Quick Drop
Tongue Jack footpad is firm and level.
4. Make sure the crank handle is in its stored position
(Fig.4).
5. Unlatch the trailer coupler.
3/4
6. Use a " drive socket with either a cordless or electric
drill or screw gun.
A. Insert the drive socket over the hex head of the drive
screw (Fig. 4A).
B. Rotate the drive screw in a clockwise direction to
extend the jack leg to clear the hitch ball.
7. Disconnect any wires, chains or sway control that may
be equipped between the tow vehicle and the trailer.
8. Move the tow vehicle a safe distance away from
the trailer.
lci1.com 574-537-8900
Quick Drop Tongue
Jack
®
Installation and Owner's Manual
(For Aftermarket Applications)

Notes

Manual information may be distributed as a complete
document only, unless Lippert Components provides
explicit consent to distribute individual parts.
All manual information is subject to change without
notice. Revised editions will be available for free
download at lci1.com. Manual information is considered
factual until made obsolete by a revised version.
Please recycle all obsolete materials and contact
Lippert Components with concerns or questions.
6
CCD-0002167 Rev: 02.10.20