camry Premium CR 2322 Mode D'emploi page 4

14. If using the device in bathroom after use remove the power plug from the power
socket, because water proximity presents risk, even if the device is turned off.
15. Do not allow the device to wet. If the device falls into water, immediately remove the
power plug from the power socket. If the device is powered, do not put hands in the
water. Have the device checked by the qualified electrician before using it again.
16. Do not touch the device with wet hands.
17. The device has to be turned off after every use.
18. Do not leave device unattended when plugged in.
19. Keep the device out of the reach of children. Using the devices by children must be
supervised by adults.
20. The power cord should not touch hot parts of the device and should not be located
near other heat sources.
21. Do not wrap electric cable around the device.
22. Do not use the appliance in the bath.
23. Do not remove dust or foreign bodies from the inside of the device using sharp
objects.
24. Do not use outdoors or where aerosols are being used or where oxygen is being
administered.
25. Do not cover the appliance, it might cause the accumulation of heat in its interior and
it may cause damage or fire.
26. Hairsprays contain flammable materials. Do not apply them while using the device.
27. Do not use the device on people who are sleeping.
28. During operation, do not put the device on a wet surface or on a surface that is
sensitive to heat and high temperatures.
29. After use, turn off and unplug the unit. Wait until the device cools down before storing.
30. The heating elements reach high temperatures during operation. Do not touch hot
parts of the device with bare hands and do not allow it to come into contact with the
scalp, as this may cause burns.
31. The device is not intended to be operated with external timers or a separate remote
control system
.
DESCRIPTION OF THE DEVICE
1. On/Off button
3. Handles
5. Lock
USING THE DEVICE
To achieve the best results in hair straightening, use a device on washed, brushed and dry hair. To prevent hair damage, make sure to
use the correct temperature setting for your hair type.
1. Before starting power cord should be fully unrolled.
2. Insert the plug into the power socket.
3. Press the On/Off button (1) until hair straightener turns on and LCD display lights up.
4. Adjust the temperature using temperature buttons (2). During heat up time, the LCD temperature display will start flashing until the
desired temperature is reached. The digital display will stop flashing when the product is ready to use.
5. Starting from the top of the head choose a small strand of hair and straighten it and comb.
6. Then put it between the plates (7)
2. Temperature setting +/- buttons 150ºC - 170 ºC ... - 230ºC
4. White LCD display
6. Plates
4