Publicité
DEMO SONG
To start and stop the in-built demo song, press the
[DEMO] button. The display will show "dE". The
[START/STOP] button can also be used to stop the
song.
REVERB
To add reverb to the kit sounds, press the [REVERB]
button and then adjust the amount as required
using the [SELECT ˄/˅] buttons. The display will
show the reverb level. (0 = no reverb, 3 = max
reverb)
RECORD
The DD70 allows you to record your performance.
Once you have selected the desired song, kit, drum
off/on and reverb settings, press the [REC] button.
The record light will begin flashing and the unit is
ready to record. To begin recording, either hit a
drum pad or press the [START/STOP] button. The
record light will stop flashing as recording begins.
The metronome voice will provide a count in (this
will not be recorded.) To turn off the metronome,
press the [CLICK] button.
To stop recording press either the [START/STOP]
or [REC] buttons. The record light will turn off. If the
memory becomes full, the display will show "FL"
and recording will automatically stop.
PLAYBACK
To listen back to your recording, press the [PLAY/
STOP] button to start and stop playback. Pleased
note, the song data will be lost when the power is
turned off/on.
13
Publicité
