Bellman & Symfon BE1420 Mode D'emploi page 19

Regulatory symbols
With this symbol, Bellman & Symfon confirms that the product meets the
Medical Device Regulation EU 2017/745.
This symbol indicates the manufacturer's serial number so that a specific
medical device can be identified. It's available on the product and gift box.
This symbol indicates the manufacturer's catalogue number so that the
medical device can be identified. It's available on the product and gift box.
This symbol indicates the medical device manufacturer, as defined in EU
Directives 90/385/EEC, 93/42/EEC and 98/79/EC.
This symbol indicates that the user should consult the instructions for use.
This symbol indicates that it is important for the user to pay attention to
the relevant warning notices in the user guide.
36
This symbol indicates important information for handling and product
safety.
Temperature during transport and storage: –10° to 50° C, 14° – 122° F
Temperature during operation: -10° to 40° C, 14° to 104° F
Humidity during transportation and storage: <90%, non-condensing
Humidity during operation: 15% – 90%, non-condensing
Atmospheric pressure during operation, transportation and storage:
700 hpa to 1060 hpa
This device is designed such that it functions without problems or restrictions
Operating
if used as intended, unless otherwise noted in the instructions for use.
conditions
With this CE symbol, Bellman & Symfon confirms that the product meets
EU standards for health, safety, and environmental protection as well as
the Radio Equipment Directive 2014/53/EU.
EN
37