Spector&Co SPECTECH T253 Mode D'emploi page 2

T253 Product Map
T253 Operation
1. ON: press & hold multi-function button to power ON
2. Once T253 has been turned ON, it is automatically in WIRELESS mode
3. Insert SD card reader OR input audio cable to switch to SD card or AUX mode
4. OFF: press & hold multi-function button to power OFF
Wireless Pairing
1. Once T253 has been turned on, it is automatically in WIRELESS mode (blue LED will flash quickly to
indicate the speaker is ready for Wireless pairing)
2. Enable Bluetooth function on your electronic device.
3. Search Bluetooth signal Spector T253 & pair your device (blue LED will flash slowly to indicate the
T253 has been successfully paired)
NOTE: previously paired devices will automatically re-connect to the T253 speaker when both devices are
turned on & within range.
Wireless Mode
1. Play/Pause : press multi-function button once
2. Volume control: turn volume dial
3. Skip songs: press skip song
4. Previous songs: press previous song
5. Answer/end incoming calls: press multi-function button once
6. Rejecting incoming calls can be controlled directly from your audio device
button once (see #3 in Product Map)
button once (see #5 in Product Map)
No. Description
1 Volume control dial -/+
2 LED indicator
3 Skip songs
4 Multi-Function button
5 Previous songs
6 Passive sub-woofer
7 AUX port
8 Microphone
9 USB output port
10 Micro/USB input port
11 MSD card reader