Using Remote Control - Hannah Montana HM1310ATVD Guide D'utilisation

USING REMOTE CONTROL

Changing Channels (Analog Channel)
•
Press the " -"or " +" buttons to change the higher or lower stored channel.
•
Press the numeric button "0~9" to direct select the channels.
Changing Channels (Digital channel)
•
Press the " -"or " +" buttons to change higher or lower store main channels and sub-
channels.
•
Press numeric button "0~9" and "-" button to direct select the main channels and
sub-channels then press "OK" button to confirm.
For example: to select CH90-2
•
Press number "9" and number "0" button then press "-" button and press number
"2" button. Then press "OK" button to confirm.
To delete the wrong input digit
•
Press the " " button to delete the wrong input digit.
To confirm the Channel digit input
•
Press the "OK" button to confirm.
Change the SUB-Channel (Digital Channel)
•
Press the "SUB-CH" button to change the higher and lower SUB-Channel.
To Change to Audio Channels (Digital Channel)
• Press the " " button to select the desired audio channel ,if the bilingual language
is available.
To change the screen aspect ratio(Digital Channels)
•
Press the " " button to change the aspect ratio of picture size.
•
LETTER BOX
•
ZOOM
•
FULL
To select Analog TV/Digital TV/AV
•
Press the "INPUT" button to highlight desire "ATV/DTV/AV", wait for few seconds will
enter to the selected mode automatically.
AUTO POWER OFF
If no signal is continuously detected from the antenna or broadcasting for more than 5
minutes, the TV will power-off automatically.
15