Télécharger Imprimer la page

Publicité

Liens rapides

SLIDING DOOR HARDWARE - BY PASS
BYP-60SW •
For 2 or 3 doors up to 60 lbs. each with thickness of 1-3/8"
Tools Required • Outils requis • Herramientas requeridos
Drill (3/32") • Perceuse (3/32") • Taladro (3/32")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents fines (optionnelle) • Sierra de dientes finos (opcional)
Flat Head Screw Driver • Tournevis à tête plate • Destornillador de cabeza plana
20 mm Forstner Bit • 20 mm pointe Forstner • Broca Forstner de 20 mm
CONTENTS
A. Track
B. Carrier B Offsets
C. Pull
D. Floor Guide
E. #8 x 3/4" Phillips Pan Head Screw
F. #8 x 1-1/4" Phillips Pan Head Screw
G. #8 x 1-1/2" Phillips Pan Head Screw
H. Door Stop
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-60Sw •
Pour 2 à 3 portes jusqu'à 27,2 kg chacune d'une épasseur de 3,5 cm
CONTENU
A. Coulisse
B. Supports a rouleaux décalés B
C. Poignée
D. Guide de porte
E. #8 x 3/4" Vis Phillips
tête cylindrique
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-60SW
• Para 2 o 3 puertasde hasta 27,2 kg cada una y de 3,5 cm de grosor
CONTENIDO
A. Caril
B. Offsets del portador B
C. Deslizador
D. Guía del piso
E. #8 x 3/4" Tornillos Phillips
de cabeza chanfleada
2-Door
3-Door
1
1
B.
4
6
2
3
1
2
13
26
7
14
4
4
1
1
2-Portes
3-Portes
1
1
4
6
2
3
1
2
13
26
2-Puertas
3-Puertas
1
1
4
6
2
3
1
2
13
26
C.
E.
F.
G.
CONTENU
F. #8 x 1-1/4" Vis Phillips
tête cylindrique
G. #8 x 1-1/4" Vis Phillips
tête cylindrique
H. Butoir
CONTENIDO
F. #8 x 1-1/4" Tornillos Phillips
de cabeza chanfleada
G. #8 x 1-1/2" Tornillos Phillips
de cabeza chanfleada
H. Tope de la puerta
#310300_C (0416)
Assembly
Instructions
A.
D.
H.
#310300_C (0416)
Instructions
d'assemblage
2-Portes
3-Portes
7
14
4
4
1
1
#310288_B (0912)
#310300_C (0416)
Instrucciones para
el ensamblaje
2-Puertas
3-Puertas
7
14
13
26
1
1

Publicité

loading

Sommaire des Matières pour Knape & Vogt BYP-60SW

  • Page 1 #310300_C (0416) SLIDING DOOR HARDWARE - BY PASS Assembly BYP-60SW • For 2 or 3 doors up to 60 lbs. each with thickness of 1-3/8" Instructions Tools Required • Outils requis • Herramientas requeridos Drill (3/32") • Perceuse (3/32") • Taladro (3/32") Phillips Screw Driver •...
  • Page 2 #310300_C (0416) SLIDING DOOR HARDWARE - BY PASS Assembly Instructions 3-7/16" PREPARE OPENING (8,7 cm) Hmax = Door Height + 2-1/16" • Hmin = Door Height + 1-5/8" 2-Door Width = 2 x Door Width - 1" 1-1/4" - 1-9/16" (3,2 cm - 4 cm) Opening Height Hauteur Ouverture...
  • Page 3 #310300_C (0416) SLIDING DOOR HARDWARE - BY PASS Assembly Instructions HANG DOORS • Mount rear door first by tilting door back and resting hangers on rear rail. • Repeat for front door on front rail. ADJUST AND FINISH • Adjust door to square with sides of door opening. •...
  • Page 4 Instructions d’assemblage QUINCAILLERIE POUR PORTE COULISSANTE - BY PASS Instrucciones para HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS el ensamblaje PRÉPARATION DE PREPARAR ABERTURA L’OUVERTURE Altura máxima = Altura de la puerta + 5,2 cm Altura mínima = Altura de la puerta + 4,1 cm Hmax = Haut.