Publicité
Les langues disponibles
Les langues disponibles
Proceed as follows to assemble the various parts:
1. The blades are integral with the
base, which is provided with a
watertight seal by a circular gasket.
To fix the base to the underside of
the jug, fit the gasket correctly,
engage the base (the blades must
be inside the jug) and turn it
anticlockwise to lock it in place.
Reverse this procedure to remove
.
the base
2. Fit the measuring cap fully into
its hole and turn it to secure it.
Place the lid on the top of the jug
so that it is facing slightly to the
left: the fins on its edge must be
next to the tabs on the jug. Push
the lid fully down and turn it
clockwise into the correct position
(symbols
and
aligned), which
will trip the safety switch and
enable the motor to start.
Reverse the above procedure to
remove the lid and measuring cap.
18
Publicité
