Publicité
Les langues disponibles
Les langues disponibles
NM-MICITRV003
Quick Start -
MICITRV valve
Set room controller to pairing mode
Check the user guide of the room controller.
Room controller
Pairing-mode
Press the push button twice. You may have to repeat
LED flash pattern
1 x flash = Successful pairing
6 x flash = Pairing failed
Reference run
Press the push button once; the valve adjusts the min
and max positions. Then enters normal operation.
Additional things to know
•
Connection nut M30x1.5; adapters are available for
many other valve types
•
Valve should be working freely and not be calcified
•
Valve position (0-100%) is specified in the EnOcean
protocol A5-20-01
•
Every 10 minutes, the valve connects to the room
controller, requesting an update to the valve position.
Then the valve moves to the specified position.
•
Summer mode : Radio communication interval in
creased from 10 minutes to 8 hours.
•
To remove the valve, press the push button twice and
wait until the motor stops.
Then loosen the coupling nut.
Connection nut
Serial number
Phone : +33 (0)3 59 61 02 41
e-mail : contact@ubiwizz.com
www.ubiwizz.com
this step.
Temperature sensor
LED
Push button (recessed)
NM-MICITRV003
Quick Start -
MICITRV valve
Set room controller to pairing mode
Check the user guide of the room controller.
Room controller
Pairing-mode
Press the push button twice. You may have to repeat
LED flash pattern
1 x flash = Successful pairing
6 x flash = Pairing failed
Reference run
Press the push button once; the valve adjusts the min
and max positions. Then enters normal operation.
Additional things to know
•
Connection nut M30x1.5; adapters are available for
many other valve types
•
Valve should be working freely and not be calcified
•
Valve position (0-100%) is specified in the EnOcean
protocol A5-20-01
•
Every 10 minutes, the valve connects to the room
controller, requesting an update to the valve position.
Then the valve moves to the specified position.
•
Summer mode : Radio communication interval in
creased from 10 minutes to 8 hours.
•
To remove the valve, press the push button twice and
wait until the motor stops.
Then loosen the coupling nut.
Connection nut
Serial number
Phone : +33 (0)3 59 61 02 41
e-mail : contact@ubiwizz.com
www.ubiwizz.com
this step.
Temperature sensor
LED
Push button (recessed)
Publicité
