Operating The Powered Adjustment Options; Selecting The Desired Adjustment Option - Scout MOBILITY SHARK Manuel D'utilisation

3. Operating the powered adjustment options

Not every wheelchair has been equipped with powered adjustment options. We make a
distinction between four different adjustment options to the seating system:

Legrest adjustment

Powered seatlift adjustment

Tilt adjustment

Backrest adjustment
Figure 3.1 Powered adjustment options
3.1

Selecting the desired adjustment option

1. Switch on the controller
2. Press on the 'adjustment' button to select the 'adjustment options' mode (E in figure
1.2).
3. Push the "1" or the "2" to select the desired adjustment. The corresponding number
enlights on the display.
4. Moving the joystick forwards and/or backwards will activate the selected powered
adjustment option (see table 3.1). Move the joystick forwards or backwards until the
desired adjustment option has been attained.
Tilt adjustment
Seat lift
adjustments
Backrest
adjustments
Legrest
adjustments
Table 3.1 Powered adjustments
5. To return to the 'drive' mode: Press on the 'Speed Regulator' button to select the
'drive' mode.
Note: If you move the chair while adjusting the powered seatlift option, the speed
will be reduced.
Move joystick backwards
The entire chair will tilt
backwards
The entire chair will be raised
The backrest will tilt
backwards
The legrest angle will
increase, the footplate will be
raised
20
Move joystick forwards
The entire chair will tilt
forwards
The entire chair will be
lowered
The backrest will tilt
forwards
The legrest angle will
decrease, the footplate will
be lowered