Basic Operation Of Hands-Free Phoning; Making A Phone Call; Taking A Phone Call - Pioneer CD-BTB200 Mode D'emploi

Section
02 Bluetooth Telephone
# Before disconnecting cellular phone from this
unit, make sure to adjust the volume to proper
level. If the volume has been muted (zero level)
on your cellular phone, the volume level of your
cellular phone remains muted even after the cel-
lular phone is disconnected from this unit.
Basic operation of hands-
free phoning
These are the basic operations to use hands-
free phoning via Bluetooth wireless technol-
ogy. More advanced hands-free phoning op-
erations are explained starting on Introduction
of advanced hands-free phoning operation on
the next page.
Important
Advanced operations that require your attention
such as dialing numbers on the monitor, using
phone book, etc., are prohibited while you are
driving. When you need to use these advanced
operations, stop your vehicle in a safe place and
operate.

Making a phone call

Voice recognition
If your cellular phone features voice recogni-
tion technology, you can make a call by voice
commands.
! Operation varies depending on the type of
your cellular phone. Refer to the instruction
manual that came with your cellular phone
for detailed instructions.
! This function can be operated only when
the connection is established with HFP
(Hands Free Profile).
10
En
1 Touch VOICE to turn the voice recogni-
tion function on.
Voice dial icon appears on the information bar.
Voice recognition function is now ready.
# If your cellular phone does not feature voice
recognition function, you can not touch VOICE.
2 Pronounce the name of your contact.

Taking a phone call

Answering an incoming call
Even when a source other than Telephone is
selected or when this unit is turned off, you
can still answer incoming calls. If you set this
unit to automatically answering incoming
calls, refer to Setting the automatic answering
on page 20.
1 When a call comes in, touch
# If the private mode is selected on the cellular
phone, hands-free phoning may not be per-
formed.
2 To end the call, touch
The estimated call time appears in the display
(this may differ slightly from the actual call
time).
# You may hear a noise when you disconnect
the phone.
Rejecting an incoming call
You can reject an incoming call. To reject all
incoming calls automatically, refer to Setting
the automatic rejecting on page 20.
% When a call comes in, touch
The call is rejected.
.
.
.