Connecting The Controller And Remote; Faq - THINK GIZMOS TG801 Manuel De L'utilisateur

3.3 Connecting the Controller and Remote

Once all batteries have been inserted follow the steps below to control your Ingenious
Machine.
1. Ensure the power switch on the motor is set to the "ON" position. The LED light on the
motor should flash quickly.
2. Press the F4 key on the Remote to select the Red or Green Channel. (The colour of the led
on the battery pack represents the two different channels which can be selected).
3. Press the F5 button to confirm the channel selection. The LED light on the battery pack
should now flash slowely showing it is connected.
4. Congratulations! Your Ingenious Machine is ready to go. Use the controller to command
your machine to move.

3.4 FAQ

Q: How do I use more than one Ingenious Machine at a time?
A: Up to 2 Ingenious Machines can be used at the same time in a location. When connecting
your Ingenious machines follow the connection instructions one machine at a time and
ensure the first is set to the Green Colour Channel and the seconds is set to the Red Colour
Channel.
Q: Help when I press left my machine turns right, how do I reverse this?
A: If you find your Ingenious Machine is turning in the opposite direction to the direction
pressed simply press the F5 Key which should switch the motor directions.
6