Publicité
Les langues disponibles
Les langues disponibles
Model
This Manual applies to all direct charged LED Umbrella BT Speaker:
Specification
Our LED Umbrella BT Speaker is manufactured to an international standard (IP20) only for indoor or under umbrella,
not near or in pools, provided that they are used in accordance with this Instruction Manual. This product is made of
white polyethylene.
Ambient temperature for operation:
LED
Battery:
Remote control battery:
Remote control effective distance:
Charging time:
Operation time:
USB Charging:
Warnings and Cautions
1. These products and their packaging are not toys, please keep out of reach of children.
The remote control and USB cable are not waterproof and must be kept in a dry location at all times.
Never charge the product in a pool, water or rain, charge in a dry, indoor location.
This product is not designed to be used in pools or ponds.
Disconnect the charger when not in use.
Do not stand, or jump on this product.
Do not sit on this product if it is cracked or damaged.
8. Keep the product away from chemicals and heat.
9. Do not attempt to open the product and its accessories.
10. Do not put under direct sunlight all the time when not in use.
11. Do not attempt to open the product,if open it by consumer themselves,product will be out of after-sale service.
Operation
Charging your new Product
Charge the product for 6 to 8 hours before using as below steps:
1. Use a adaptor with output 5V 2A Max to connect USB plug for charging,the "DC Charging port"as shown in photo 1.
2. The "Charging indicator light" shown in photo 1 will turn red to indicate that charging is working.
3. The charging indicator light turns off to indicate that it's fully charged.
4. Your LED Umbrella BT Speaker now is ready for use.
-14˚ C to 35˚C
LED
20 x PCS RGB
Lithium Battery (1x3.7V, 2000MAH )
CR2025 (3V)
4-8 meters
Around 6 to 8 hours
Around 4 to 6 hours depends on lighting brightness
and sound volume
Input for product: 5V 2A Max
(Not including Adaptor)
EN
Publicité
