Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
WARNING
TO ATTACH FEET
2)
• Align the feet to the bottom of each ends
of the frame for a total of four (4) (Fig.
2a).
• Insert the screws and tightly fasten to
secure the feet to the frame (Fig. 2b).
NOTE: Pull on the feet to make sure that
they are secured.
5
5
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
TO ATTACH TRAY
3)
Fig. 2a
Fig. 2b
ATTENTION:
The Tray is not designed to hold the child in
the chair. Stay near and watch child during
use.
child unattended. Refer to the Harness Straps
on page
WARNING:
Always
check that the high chair is
locked in the open position
before using.
WARNING:
The child's
tray is not a restraint device:
always secure your child with
the seat belt. DO NOT lift by the
tray. Do not place hot liquids
or more than 3 pounds (1.36
kg) on the tray. Serious burns
or unstable conditions could
result.
•
To attach the Tray, line up the grooves
on the bottom of the Tray with the tracks
of the armrest. Squeezing the 2 release
handles, slide the Tray into the tracks
(Fig. 3a). The Tray has a 3-position
adjustment. To adjust the position,
squeeze the 2 release handles located
on the sides of the Tray and reposition
the Tray (Fig. 3b).
NOTE: The tray must align with the
indicator for all 3 positions as shown
in the diagram (Fig. 3b).
Release the
Tray's handles and make sure the Tray is
securely latched into a position.
• To remove the tray squeeze the 2 release
handles and slide out from the tracks (Fig.
3a).
NEVER leave
8.
Copyright © 2020, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
WARNING
Fig. 3a
Tray
3
2
1
Fig. 3b
6
6
Publicité
