OPERATION
• Preparing the product for use:
1)
Mount the top part of the
product, pressing the red
buttons on the opposite side and
pushing the lid into its position
(Fig. 1a).
NOTE: Once inserted into this
position, the red button should
lock in.
• Close the lid. Make sure that it is
properly closed. If not, check that
the lid has been properly installed
(Fig. 1b).
USING THE DIAPER CHAMP
• Insert the bag: Unlock the lid
2)
by pressing the button (Fig. 2a)
and, at the same time, lifting the
top part upward, using the tab as
shown in the figure (Fig. 2b).
• Release the bag holder ring,
holding on only to the top part, as
shown in the figure (Fig. 2c)
• Position the bag inside the ring.
Always use bags of the proper
size (Fig. 2d).
3
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 1a
Fig. 1b
Fig. 2a
Fig. 2b
• The top part of the bag must
be positioned between the bag
holder ring and the edge of the
bin ( Fig. 2e).
• Close the lid until you hear a
closing click ( Fig. 2f).
Fig. 2d
Fig. 2e
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits
OPERATION
Fig. 2c
Fig. 2f
réservés.
4