KINZO 871125217869 Manuel D'utilisation page 2

[UK] Heavy Duty Shelf
Ca.172x75x30cm
Max. load per shelf: 150kg
Total bearing capacity: 750kg
Safety instructions
When the connecting hooks on the profiles are bent, they can easily be bent back to their original
position using a flat screwdriver. The rack may not be loaded with the maximum load capacity in one
point. The load on the shelves should be distributed evenly so that the chipboard does not get
damaged. In order to be able to load the rack up to its maximum capacity, the lower shelf must be
mounted in the lowest position of the uprights. The rack is not suitable for humid rooms, because
this could damage the MDF board.
ATTENTION! When assembling the rack, always wear gloves to prevent injuries. To prevent damage
to the rack, we recommend using a rubber hammer. Never exceed the maximum load per shelf or on
the rack itself. The rack should never be used without the reinforcements.
ATTENTION! Always attach the rack to the wall on the top and the bottom for maximum bearing
capacity. The fixing materials must be adapted to the type of wall. If the rack is not installed
according to these instructions, the manufacturer's responsibility ceases to apply. The
manufacturer's responsibility is limited to the metal rack. All other damage is excluded.