Publicité
Les langues disponibles
Les langues disponibles
!
WARNING
•
Do not touch safety barrier until cooled.
•
Allow safety barrier and appliance to cool completely before performing any maintenance as they will remain hot
after appliance is no longer operating.
•
To avoid danger of suffocation, keep the packaging bag away from babies and children. Do not use in cribs, beds,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
1. Remove the screws and plate on the back of the
appliance.
2. Hold the variable speed switch upright, lining up the
variable speed bracket hole with the screw hole (Fig. 1)
and screw into place.
3. Insert the black and white wires into the hole in
the appliance (Fig. 2), and then attach them to the wires
on the variable speed switch (Fig. 3).
4. Remove the 2 screws from the side access plate. Insert
the blower power cord through the access hole and plug
into outlet on the inside of the appliance (Fig. 4).
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
BKGDI3 Blower Installation Instructions
for GDI3 Appliance Only
Variable Speed
Switch
Fig. 1
Fig. 3
5. Using 8 screws (supplied), attach the blower assembly
(Fig. 5), ensuring that the thermal disc is installed and in
the proper location.
6. Loosen the thermal disc bracket (2 screws). Slide the
bracket until the thermal disc is touching the rear of the
firebox and then secure (Fig. 6).
Fig. 2
7. Reinstall the side access plate. Plug the
power cord of the appliance into the
nearest wall outlet.
• 1(866)820-8686
Fig. 4
Blower Power
Cord
Fig. 5
Thermal Disc
Rear of
Firebox
Fig. 6
W415-1882 / 08.10.18
• www.napoleon replaces.com
Publicité
