REGARDING THE INFORMATION FOR OPERATING TIMES AND
SETTING, THANKS TO REFER TO THE BELOW PARAGRAPH OF THE
MANUAL.
DANGER OF ELECTROCUTION!
THIS APPLIANCE MUST BE EARTHED. IF YOU NEED TO USE AN
EXTENSION LEAD, IT IS IMPORTANT THAT YOU USE A MODEL
FITTED WITH AN EARTH PLUG.
THIS APPLIANCE SHALL NOT BE USED WITH AN EXTERNAL
TIMER OR A SEPARATE REMOTE CONTROL SYSTEM.
CHECK THAT THE VOLTAGE MARKED ON THE RATING PLATE
MATCHES TO YOUR LOCAL SUPPLY. IF NOT THE CASE, DO NOT
USE THE APPLIANCE AND SEEK FOR EXPERT ADVICE.
CHECK THAT YOUR ELECTRICAL INSTALLATION IS SUFFICIENT FOR
SUPPLYING AN APPLIANCE OF THIS WATTAGE.
TAKE ALL NECESSARY MEASURE WITH CORDS AND EXTENSIONS
TO AVOID ANY INJURIES WHILE IN USE.
NEVER IMMERSE IN WATER OR ANY OTHER LIQUID THIS
APPLIANCE, ITS ELECTRIC PLUG AND CORD.
ALWAYS UNPLUG THE APPLIANCE AND LET IT COOL DOWN
COMPLETELY BEFORE ANY CLEANING OPERATION.
FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER LEAVE
THE APPLIANCE IN A PLACE THAT IS EXPOSED TO HUMIDITY OR
INCLEMENT WEATHER CONDITION.
NEVER USE APPLIANCE AS AN ADDITIONAL HEATING SOURCE.
DO NOT PUT THIS APPLIANCE ON TOP OF OTHERS.
NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
IF THE SUPPLY CORD IS DAMAGED, IT MUST BE REPLACED BY THE
MANUFACTURER, ITS SERVICE AGENT OR SIMILARLY QUALIFIED
ENGLISH