RayTek Raynger ST60 ProPlus Standard Manuel page 6

English
I
H
G
F
E
4
In SCAN mode, the LCD displays both the current temperature (G) and selected
Mode function (D, E) in Celsius or Fahrenheit (B). The unit will HOLD the last read-
ing for 7 seconds after the trigger is released; the word HOLD appears (H). When
the battery is low, the battery icon is displayed, but the unit will continue to function;
when the battery is dead, the display will blank, and the unit will no longer function.
To activate the laser and backlight, pull the trigger. Press the laser/backlight button
(4) once to activate the backlight, twice to turn both laser and backlight on, and a
third time to turn them off.
4
J A
D
5
SET
LOG
2
MODE
3
User Interface
Display
A) Backlight "On" symbol
B) °F/°C symbol
C) High Alarm and Low Alarm symbol
D) Temperature values for the MAX, MIN,
DIF, AVG, HAL (high alarm), LAL
B
(low alarm), and logged temperatures
E) Symbols for MAX, MIN, DIF, AVG,
HAL, LAL, PRB, and
F) LOG icon shows log Mode for data
C
storage
G) Current temperature value
H) SCAN or HOLD
I) Emissivity symbol and value
J) Low Battery, lock "On", and laser
"On" symbols
Buttons
1) SET button (for setting the high
alarm and low alarm)
1
2) Up and Down buttons
3) MODE button (for cycling through the
Mode loop)
4) Laser/Backlight on/off button (pull trig-
ger and press button to activate
laser/backlight)
5) LOG button (for storing data)