Powerplay PJR 2050S Mode D'emploi page 7

3
Slip tab of stabilizer foot (E) into slot on bottom
right, when facing the unit, of power washer unit (A).
Secure with screw (AA).
Hardware Used:
AA Screw
5
H
3
B
2
Twist collar then pull back to release the Soft PVC high
pressure hose (B) connection from the gun (H).
16ARN036_2050_ENG-FR-SP.indd 7
A
E
AA
x 1
1
3
B
4
H
B
1
B
Soft PVC High Pressure Hose Assembly
Pull back on collar at the end of the Soft PVC high pres-
sure hose (B). Push firmly to connect hose to spray gun
(H). Twist collar to secure. Confirm hose is locked into
spray gun by slightly pulling on them. The hose is now
securely attached to spray gun.
Note: Soft PVC High pressure hose (B) is fitted to the
hose reel and ready to use. It only needs to be attached
to the spray gun (H).
2
3
7
17/2/16 下午5:15