Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FRONT PANEL
1 :
Balanced microphone input on XLR with phantom power supply (sensitivity adjust from
on the rear panel)
2 :
Led peak indicator for microphone input.
3 :
Fugitive key « ON/OFF » with back light. Internal flip flop memorises the state. Reset by an
other push.
According to the internal jumpers it allows :
send a GPO, to control the remote console module.
to turn on (or not) the
to mute (or not) the microphone to the line output.
4 :
Balance adjust
5 :
Headphone output level control.
6 :
1/4" stereo headphone plug.
7 :
ON AIR perspex window with backlight. According to the internal jumpers it is controlled :
either internal by
or external by the remote console
8 :
ORDER 2 key
send the microphone signal at line level to order 2 output.
an opto coupleur GPO loop is associated to the key (to send order to the remote console)
According to the internal jumpers, the key mute or not the microphone main output
9 :
ORDER 1 key
send
the microphone signal at line level to order 1 output
an opto coupleur GPO loop is associated to the key (to send order to the remote console)
According to the internal jumpers
the key mute or not the microphone main output.
pressing Order 1 key activates the same action on ORDER 2.
ENGLISH
1
2
3
ON AIR indicator.
.
.
.
.
14
4
5
6
7
8
9
.
A
Rami - PRT 666
Publicité
Chapitres
Table des Matières
