Publicité
Les langues disponibles
Les langues disponibles
Keep any possible distractions well away from you
when using the appliance as they may cause you
to lose your concentration. Use common sense
when operating the appliance. Do not use it when
tired or under the effect of drugs, alcohol or medi-
cation. A moment of inattention while operating this
type of appliance may result in serious personal
injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid
safety shoes, hardhat, or hearing protection used
for appropriate conditions will reduce personal
injuries.
Take the necessary measures to avoid starting the
appliance involuntarily.
Remove the tool fastening key(s) before start-
ing up the appliance. A key or tool that is not well
fastened to the appliance may cause accidents on
start-up.
Do not overreach. Keep proper footing and bal-
ance at all times. This will allow you to maintain
control of the appliance at all times.
Dress properly. Do not wear baggy or loose-
hanging clothes or accessories. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught
in moving parts.
Do not touch any of the appliance's moving parts
while it is operating.
Protect yourself from contact with and the inhala-
tion of dust created by sanding wood and metal
surfaces and surfaces coated with lead paint. Use
protective equipment that complies with the ap-
propriate health and safety regulations.
When working in amianthus/asbestos and/or silica
stone, the dust produced is extremely harmful to
your health. Wear protection against inhalation of
this dust, in compliance with current regulations on
accident prevention.
Do not touch the heated parts of the appliance, as
it may cause serious burns.
Exercise precaution after employing the stop
operation on the appliance as the tool will continue
moving from the effect of its own mechanical
inertia.
When working take care to avoid electric wires
and gas or water pipes in order to avoid an electric
shock.
Use and care:
Fully unroll the appliance's power cable before
each use.
Do not use the appliance if its accessories are not
properly fitted.
Do not use the appliance if the accessories or
consumables attached to it are defective. Replace
them immediately.
Do not use the appliance if the on/off switch does
not work.
Use the appliance handle/s, to catch it or move it.
Do not force the appliance's work capacity. Use the
correct power tool for each application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
Disconnect the appliance from the mains when not
in use and before undertaking any cleaning task.
Unplug the appliance from the mains before re-
placing any accessory.
This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
Keep the appliance in a dry, dust-free place, out of
direct sunlight.
Keep the appliance in good condition.
Check that the moving parts are not misaligned or
jammed and make sure there are no broken parts
or anomalies that may prevent the appliance from
operating correctly.
Keep the cutting tools sharp and clean.
Use the appliance and its accessories and tools
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use the appliance for operations differ-
ent from those intended could result in a hazard-
ous situation.
Let the appliance running with no load for 30
seconds in a safe position. If you notice serious
vibration or other defects stop the appliance imme-
diately. Then check the problem and /or proceed
as we describe on Anomalies and Repair clause.
Service:
Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
CAUTION: There is a risk of fire if the appliance's
cleaning is not done according to these instruc-
tions.
Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer's
liability null and void.
Instructions for use
Before use:
Make sure that all the product's packaging has
been removed.
Ensure that the voltage indicated on the rating
label matches the mains voltage before plugging in
the appliance.
Prepare the appliance according to the function
you wish to use:
Publicité
