Publicité
Les langues disponibles
Les langues disponibles
Preface
Dear Customer,
Thank you for purchasing this 8 relay extension
board. You made the right decision in choosing this
state-of-the-art technology, which complies with the
current standards of domestic and European
regulations. The CE has been proven and all
related certifications are available from the
manufacturer upon request.
To maintain this status and to guarantee safe
operation, it is your obligation to observe these
operating instructions! In the event of questions,
please contact your local specialist dealer.
This 8 relay board is an extension module for the
intruder alarm panels TERXON S und TERXON M.
With this module you have 8 additional relay
outputs instead of the 8 extra outputs of the alarm
panel.
Read carefully the notes and advice in
!
these operating instructions! If you do not
follow these instructions, your guarantee
claim becomes invalid! We can accept no
liability for the consequences!
No part of the product may be changed or
modified in any way.
Installation
1. Make sure that the alarm panel is disconnected
from the mains!
2. Open the housing of the alarm panel by
releasing the screws at the front cover.
3. Connect the 10 pin jack of the connection cable
to the relay board. Then connect the connection
cable (12 pin jack) to the connector strip for the
extra transistor outputs (refer to installation
manual of the alarm panel). The jack and the
3
Publicité
