Gas Equipments; Cleaning The Device - CombiSteel GGL721 Manuel D'utilisation Et D'entretien

11. GAS EQUIPMENTS

NO
PART NAME
01
Pilot Burner
02 Burner
03 Collector
05 Nut
06 Olive
08 Olive
07 Gas valve
09 Pipe
10 Ünion
10-01 Olive
10-02 Nut
11 Nozzle
12 Pipe
13 Olive
14 Nut
15 Termocouple
16 Piezoelectric
17 İgnition cable
18 Knob
19 label

12. CLEANING THE DEVICE

Device must be cleaned every day after use, after being sure that it is completely cooled down.
Cleaning must be made by a clean wet cloth by wiping the device. It is recommended that stainless steel surfaces should be wiped by
inox cleaners.
During cleaning, do not use sharp edged, cutting and drilling tools such as scraper, emery in no way.
Cleaning must not be done by spraying the water onto the device in no way.
13. INTERVENTION AFTER FAILURE
FAILURES / CAUSES

There is no cooking.

Be sure that the gas connection to the device has been made and there is gas flow to the device.

Be sure that you have opened the right control valve.

Be sure that you have fired up pilot fire.
DIMENTION/
STANDART
4,8 kW
Ø21x2 1000mm
M16x10
Ø 10 (İnlet)
3/8'' (Outlet)
ECA 703883112
Ø4
Ø 10
3/8''
Ø 10
M8
Pilot burner pipe
Ø4
Ø4
M9x1000
2.5 mm
2.5mm²x200mm
10/39