Precautions For Use And Maintenance; Information Requirements For Electric Local Space Heaters - KLARBACH HL32024we Mode D'emploi

4. Turn the function setting switch from "I" to "II" to select your chosen
temperature.
To set the power, turn the dial from 0 towards I or II:
0 = Off = ventilation I = hot
5. After reached the desired temperature, to maintain the temperature: turn
the thermostat knob counterclockwise until the light turns off. The desired
temperature will be kept constant by the thermostat function.
6. The heater comprises a protection device protecting against overheating. If
the heater overheats, a temperature limiting system inside the appliance will
automatically cut the power supply from the heating element while the
ventilator continues to function to cool the appliance. The appliance can re-
start as soon as the normal conditions and temperature needed for it to
function are re-established. Identify the causes of this overheating to avoid
any recurrences.
7. When not using this heater, return the 2 dials to their initial position: "0" and
"MIN. ", and then unplug it.
PRECAUTIONS FOR USE AND
MAINTENANCE:
1. Always unplug the appliance and keep it away from any socket before
cleaning.
To clean the outer surface of the appliance, use a lightly damp cloth. Then,
dry it thoroughly with a soft, dry cloth before using again.
Do not use any cleaning or chemical products of any kind. Do not let water
enter the openings on the heater.
2. When the appliance is not being used for prolonged periods, ensure that it is
fully unplugged from the socket and store in its packaging for simple storage
and later use.
II = very hot
13
Information requirements for electric
local space heaters
Model identifier(s):FH103T-S/HL32024we
Item Symbol Value Unit
Heat output
Nominal heat
Pnom 2
output
Minimum heat
Pmin
0.9
output (indicative)
Maximum continuous
Pmax,c 2
heat output
Auxiliary electricity
consumption
At nominal heat
elmax N/A
output
At minimum heat
elmin N/A
output
In standby mode elSB 0
Contact details Refer to Applicant Name/Address
ENG
Item Unit
Type of heat input, for electric storage
local space heaters only (select one)
manual heat charge control,
kW
No
with integrated thermostat
manual heat charge control with
kW room and/or outdoor temperature
No
feedback
electronic heat charge control with
kW room and/or outdoor temperature
No
feedback
fan assisted heat output No
Type of heat output/room
kW
temperature control (select one)
single stage heat output and
kW
No
no room temperature control
Two or more manual stages,
kW
No
no room temperature control
with mechanic thermostat
Yes
room temperature control
with electronic room
No
temperature control
electronic room temperature
No
control plus day timer
electronic room temperature
No
control plus week timer
Other control options
(multiple selections possible)
room temperature control,
No
with presence detection
room temperature control,
No
with open window detection
with distance control option No
with adaptive start control No
with working time limitation No
with black bulb sensor
No
14