HPS TITAN N Serie Installation, Fonctionnement Et Entretien page 16

Before drilling holes, please ensure
proper clearance is allowed to the resin
for both conduit and conduit nut.
Removable front
hinged door
Optional bottom
cable entry location
Installation, Operation, and Maintenance Guide - Encapsulated Low Voltage Transformer
APPENDIX D
Recommended Cable Entry Locations
Lifting backet
Recommended
cable entry location
(both sides)
Position forklift under pallet.
For final positioning with pallet
removed, forklift points are under the
transformer. Forks must be inserted
all the way through the depth.
FIGURE 1
Typical Type 4, DQT Non-ventilated Enclosure Assembly
for Three Phase.
Notes:
1. Handling - units are designed to be raised by a fork lift
from underneath the pallet. Final positioning of the unit
with the pallet removed can be via a fork lift under the
transformer with the forks between the channels.
2. Shipping - units are shipped on pallets which are to be
removed at installation.
3. Installation - This transformer can be installed indoor or
outdoor providing a degree of protection against falling
rain, sleet and external ice formation.
4. All encapsulated transformers should be located away
from any wall or any other obstruction, please refer to the
nameplate for the minimum distance.
16
Recommended
cable entry
location (both
sides)
Optional cable
entry location