Setup - Textron GREENLEE 555 Serie Manuel D'instructions

Setup

Always use safety glasses. Everyday
glasses only have impact resistant
lenses; they are NOT safety glasses.
When using in dusty environment, use
face or dust mask.
Failure to wear eye protection could
result in serious eye injury from flying
debris.
Disconnect tools before servicing and when chang-
ing accessories such as shoes, rollers, and the like.
Accidental start-up could result in serious injury.
Refer to the "Identification" section of this manual.
1. Slide the appropriate bending shoe onto the main
spindle. Orient the shoe so that the EMT hook
(silver) is about 90° clockwise from the sprocket
spoke with two drive lug holes.
2. Align the drive studs in the shoe with the holes in
the sprocket. Secure with the shoe retainer (3).
3. Mount the roller adapter (8).
4. Mount the appropriate roller support:
a. For 1-1/2" and 2" rigid, use the roller adapter
and rigid rollers.
10
b. For 1-1/2" and 2" EMT with combination
shoe, use the rigid support rollers and EMT
squeeze rollers.
Silver
Color
Greenlee / A Textron Company
8
11
8
10
555 Series Electric Benders
®
c. For 1-1/2" and 2" EMT with single-groove
shoe, use the tail rollers and EMT squeeze
rollers. Keep the squeeze roller size to be used
toward the bender.
Black
Color
13
d. For 1-1/2" and 2" IMC with combination shoe,
use the rigid support rollers and IMC squeeze
rollers.
Green
Color
e. For 1-1/2" and 2" IMC with single-groove
shoe, use the tail rollers and IMC squeeze
rollers. Keep the squeeze roller size to be used
toward the bender.
Black
Color
13
f. For 1/2" to 1-1/4" rigid, EMT, and IMC with
combination shoe, use the roller adapter and
support roller.
Triangle
Opening
8
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
11
8
12
8
10
12
8
8
9