Jensen PS260 Manuel D'installation Et D'opération page 6

Wiring (continued)
Output Wiring
The output signal allows you to conveniently connect other amplifiers to each other.
Input Wiring
Low Level Input (RCA Input)
Low level (RCA) input is preferred for best performance. Most trunk/hatchback installations will
require a 15-20 foot RCA cable, while pickup trucks and under-seat mounting will require a 6-12 foot
RCA cable. Connect an RCA cable from your receiver to the RCA input on your amplifier.
High Level Input
High level input should be used when an RCA output is not available from the receiver. Connect the
speaker outputs from the receiver to the high level input connector.
Note: Only connect the low (RCA) or high level input, not both at the same time.
Output Wiring
Cableado de la Salida
Câblage de Rendement
PS260 / PS285
4
PS2130 / PS2180
4
1.4
180 180 180
5 2 80 80 300 300 80 300
Hz Hz Hz Hz
1.4
180 180 180
5 2 80 80 300 300 80 300
Hz Hz Hz Hz
Input Wiring
Cableado de Entrada
Câblage d'Entrée
6
PS260 / PS285 / PS2130 / PS2180