Inserting The Paper - BFT Espas 20T Instructions D'installation

5

- INSERTING THE PAPER

The Espas 20T is fitted with a thermal printer for the issue of tickets valid for the car park entry
and exit. It is necessary to insert the fanfold paper correctly into the device: follow the instruc-
tions in this paragraph to load the tickets properly.
Insert the paper into the slot on the
back of the Espas 20T station.
Remove any ticket from the printer
pressing the blue side lever shown in
the photo, the correct operation will be
highlighted by a red LED on the printer
itself.
Open the Espas 20T cover fully without
disconnecting the device and pushing
the levers on the lid.
Reposition the blue lever of the printer
in the original position, pulling it out-
wards by two clicks, the correct opera-
tion will be confirmed by a green LED.
21 - Espas 20T