Uniteck UNISPLIT 160.12 Mode D'emploi page 9

WARNINGS CONTINUES
 Maintenance: check the wiring and all connections at least once a year.
 All work must be carried out in accordance with the country's current electrical regulations.
 This appliance is not intended for use by persons (including children) whose physical, sensory or
mental abilities are reduced, nor by people lacking experience or knowledge unless they have
benefited of supervision or prior instructions concerning the use of the device given by a person
responsible for their safety.
INSTALLATION

Connect terminal 30 of the UNISPLIT to the positive (+) terminal of the
main battery
Nb: Protect the connection with a 160A fuse

Connect UNISPILT terminal 85 to the negative (-) terminal of the system
(Terminal of battery 1 or 2, or ground)
Nb: Protect the connection with a 5A fuse.

a) Use with alternator, connect terminal 86 of UNISPLIT
On the + after contact of the starter.
b) Use with charger, connect terminal 86 of UNISPLIT
On one of the battery terminals

Connect the UNISPLIT terminal 87 to the positive (+) terminal of the
auxiliary battery
Nb: Protect the connection with a 160A fuse.
www.uniteck.fr
EN
FR
9/19