Leader HM001i Guide D'installation page 4

Setting the thermostat – Temperature range settings are from -10 to 50°C :
For High humidity/condensation –
rule of thumb is to set the thermostat to 5 degrees above the dew point in your area. (Example : if
humidity is displayed on the glass in 10°C temperatures, set the thermostat to 15°C.)
For extreme cold
condensation is not an issue in your area and you are using
the heater to protect your TV from extreme cold
temperatures, set the thermostat attenuator to -10°C
Heater module handling precautions
CAUTION :
• Never work on live equipment
• Do not touch the heater during operation, as it will be hot
• The heater will remain hot for several minutes after switch-off; let the heater cool down
before removing or touching
• Do not remove any attached adhesive labels
• The heater is protected by a Littelfuse glass 6A 125VAC/VDC 2AG slow blow fuse
• Do not allow electrical wire to come in contact with the body of the heater or directly in
front of the hot air outlet.
Maintenance
There are no user serviceable parts inside the unit. Disassembly should not be attempted.
This setting is variable based on your geographic location. The
temperature below -17°C – If