Publicité
Les langues disponibles
Les langues disponibles
PRODUCT OVERVIEW
The MLX24V-2 rail mount, vehicle loop detector is compatible with most gate operators. The MLX24V-2 may
be used in Center, Safety and Exit loop positions. The display feature makes set-up easy by displaying the
optimum sensitivity setting required to detect a vehicle positioned on the loop. Ten sensitivity settings allow
for fine adjustment of detection level.
The MLX24V-2 provides relay contact outputs indicating vehicle presence. The MLX24V-2 features
automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite or normal (5 min.) presence. Four
frequency settings provide flexibility in preventing crosstalk in multi-loop applications.
Sensitivity
Display
Loop frequency
Loop inductance
Grounded loop
Automatic tuning
Environmental tracking
Surge protection
Presence relay
Output B relay
Contact ratings
Power / loop fault indicator
Detect / frequency count indicator
ASB (Automatic Sensitivity Boost)
Power
Operating Current (Standby/detect)
Operating temperature
Dimensions (L x W x H)
Mounting method
Weight
Connector
MLX24V-2
18/05/2021
ENGLISH
Specifications
10 levels, 0-9
Indicates optimum sensitivity level, 0-9
Diagnostic aid
4 settings (low, med-low, med-hi, high)
20...2000µH (Q factor > 5)
Isolation transformer allows operation with poor quality
loops
Detector tunes to loop on power-up and following
frequency count function
Automatic compensation
Loop circuitry protected by surge suppressors
SPDT relay contacts (form C)
SPDT relay contacts (form A)
1A @ 24VDC...120VAC
Green LED
Red LED
Increases sensitivity after initial detection to prevent
dropout due to high-bed vehicles
12VDC...24VDC, 24VAC (see Cautions and Warnings)
15mA/45mA
-40˚C...82˚C (-40˚F...180˚F)
0...95% relative humidity
2.9"(80mm) x 0.9"(23mm) x 3.3"(84mm)
DIN rail mount - 35mm
0.25 lbs. (113 g)
8 screw terminals
14
Publicité
