Disc Operations; Playing A Disc; Starting Playback - JVC KV-MRD900 Manuel D'instructions

Disc operations

The disc type is automatically detected, and
playback starts automatically (for DVD:
automatic start depends on its internal program).
If the current disc is an audio CD, CD Text,
MP3/WMA, JPEG, or VCD without PBC,
all tracks will be played repeatedly until you
change the source or eject the disc.
• If a title list or disc menu appears while
playing a DVD or VCD with PBC, see "Disc
menu operations" on page 22.
The following marks are used to indicate
the playable discs....
DVD Video
Video CD
with/without PBC
MP3/WMA disc
All discs listed here
Before performing any operations, make
sure the following....
• For DVD playback, you can change the setup
menu setting as you like. (See pages 28 – 30.)
• For DVD/CD playback, using the remote
controller is more attractive. You can enjoy
more functions.
18

Playing a disc

Video CD with PBC
Audio CD/
CD Text
JPEG disc
If " " appears on the monitor when
pressing a button, the disc cannot accept an
operation you have tried to do.
• In some cases, without showing "
operations will not be accepted.

Starting playback

1
Open the liquid crystal panel.
• You can play a disc even if the monitor is
closed.
2
Turn on the power.
Monitor Remote control
3
Insert a disc into the loading slot.
Playback (shining) side facing down
• When a disc is inserted into the loading
slot, the power comes on, then "DISC"
is selected as the playback source
automatically.
,"