Publicité
Les langues disponibles
Les langues disponibles
GB
5. Design / Delivery
6. Installation
1. Screw the foot (spike or mounting plate) clockwise to the sleeve.
2. Then screw the sleeve clockwise into the socket body.
3. Mounting
3.1Installation with ground spike (picture A)
Insert the spike of the product into a solid surface, maximally up to plate
and ensure adequate stability. Also pay attention to a vertical position when
inserting and operating the product.
3.2Mounting with mounting plate(picture B)
Mount the mounting plate with four screws (Ø 5mm) and corresponding
dowels on firm ground (e.g. base plate). Ensure adequate stability. Also pay
attention to a vertical position when operating the product.
8
Socket body with power cord
Shell
Foot (spike or Fixing plate)
Publicité
