Lenovo EMC2 px Serie Guide De Démarrage Rapide page 2

Quick Install
IMPORTANT! Before purchasing or installing drives, check the compatibility list available for your px NVR at
http://support.lenovoemc.com for approved and supported HDD and SSD brands and models.
1. Make sure at least one drive (HDD or SSD) is installed in the px NVR.
2. Use the included network cable to connect the px NVR to your network hub, switch, or router.
3. Use the included power adapter and cord to plug the px NVR into a surge-protected power source.
4. The device will power on automatically.
5. Go to http://setup.lenovoemc.com to launch setup for your px NVR.
If you cannot access the web setup portal or your px device isn't displayed there, use one of the following
options to initiate the setup sequence.
• From a LenovoEMC client, select Configure features, the Manage menu option, or the settings icon.
• From Windows Explorer, go to Network > Other Devices and double-click the device name.
• From a web browser, enter the device IP address or model name (for example, px4-400d). To use the
model name on a Mac, add .local after the name in the browser (for example, px4-400d.local).
6. Once you complete the device setup sequence, the px NVR will automatically boot to the Milestone
Arcus login screen. Login with the username and password you created during setup and accept the end-
user license agreement.
7. If your network uses DHCP, the px NVR will scan for video cameras on the network and
automatically configure and license them. If a camera needs additional configuration or if a camera is not
detected, click the Settings tab.
NOTE: If the px NVR does not have internet access, you will see an alert indicating the license needs
activation. Click Manual Activation and follow the prompts to activate your camera licenses.
8. To configure other network settings, click the Manage icon at the upper right corner of the Settings
screen. This takes you to the LifeLine management interface. Click the help icon if you need instructions
using any feature in LifeLine. Click the Milestone Arcus icon to return to video management.
Using Your px Series Network Video Recorder
Using Milestone Arcus
To modify individual camera settings or views, go to the Settings tab and click the Configure button next to the
camera. For detailed information on using Milestone Arcus, click Learn to access online help.
Powering off the px NVR / Disconnecting from the Network
You can keep the px NVR powered on for constant use on your network. If you need to disconnect it from your
network, power down using either the power button or the shut down option in the management console.
CAUTION: To prevent data loss, do not disconnect this device or any connected storage devices during data
transfer.
Backing up Your px NVR
It is recommended that you backup content stored on your px device frequently to ensure that your critical data
is always protected. Consult the help files available from the management console for information on how to
copy files to other network locations. You can also use backup software that supports NAS devices.
User's Manual and Support Information
The px device provides complete instructions in its online help. In addition, a complete user guide, additional
configuration instructions, troubleshooting information, and the latest software downloads for your device are
available from the LenovoEMC web site at http://support.lenovoemc.com.
Safety Information
Observe the following guidelines when performing any work on your px device:
1. Follow all instructions marked on the device and in the documentation.
2